If rumors are true, we will see more machinery on display at GlassBuild America next week for the fabrication of “skinny tiples.” I was having a beer with a colleague last night and he was asking me why the emergence of manufacturing technology featuring skinny triples would be such a big deal.

The major advantage of a skinny triple, I told him, is really that they are simply “skinny.” You see, conventional triple-pane insulating glass units (IGUs) utilize three lites of glass, which are all the same thickness. But the skinny triple utilizes a center lite which is much thinner than the other two lites of glass. Therefore, when comparing a skinny triple to a conventional triple pane IGU with identical sized airgaps, the skinny triple has a smaller overall thickness (or OAT) and is also lighter in weight.

Why is this important? Well, older vinyl window designs are oftentimes constrained in terms of the maximum OAT which can fit within the sash pocket. The maximum OAT may be 7/8 inch, ¾ inch or sometimes up to 1 inch. Newer window designs can accept 1-1/8 inch or even 1-3/8-inch OAT IGUs, but what if you have not yet made the switch to one of these newer platforms, yet you wish to utilize triple panes IGUs? Skinny triples are the answer. You can now make triple-pane IGUs to fit within the constraints of these older window designs. Lower weight is also important because it helps reduce the added cost of heavy-duty balance systems that are needed to handle the extra weight of the sashes. This keeps the overall cost performance ratio of the window design in check while enhancing the value proposition to the homeowner.

Another major advantage of skinny triples or triple-pane units, in general, is that the small airspace gaps that are typical of triple pane units serve to unlock the key advantages of using Krypton gas. The use of Krypton gas has really fallen off in recent years due to its high cost and the emergence of more cost-effective methods of meeting NFRC U-value requirements in the northern zone, such as fourth-surface low-E coatings. But the cost of Krypton gas has come down significantly in recent times, so it is a perfect time to reconsider using this noble gas in conjunction with skinny triples to reach your NFRC thermal performance targets. I remember a time before fourth-surface low-E coatings emerged, when Krypton gas was going for $1.50 per liter and companies were buying it. But when fourth-surface low-E came on the scene, it was a hard sell even at half that price. However, recently I have seen krypton gas as low as 35 to 40 cents per liter, so the timing is right for a Krypton comeback!

So why make skinny triples when you can simply make dual pane IGUs with fourth-surface low-E? Well, triple pane units have a trick up their sleeve, which is better condensation resistance factor or condensation index values (CRF or CI), which means superior resistance to condensation forming on the inside pane of the window during the cold winter months when humidity is trapped inside the home. Triple panes can also be made with two different sized air cavities, which serve to reduce sound transmission, resulting in better sound transmission class (STC) ratings. The reason I mention this is because I believe that, someday, sound transmission in windows will become a much bigger deal. This is a discussion for another day but worth mentioning here.

I previously wrote about the Forel skinny triples line which was launched at the GlassBuild show back in 2024. The line was running skinny triples made with Quanex’s Super Spacer. The Forel line can fabricate gas-filled skinny triples with a cycle time of approximately 45 seconds. This translates to 640 units in an 8-hour shift, assuming continuous production. That is very impressive for a machine fabricating triple-pane gas-filled units.

Now, as I said, rumor has it that another major equipment fabricator may be rolling out a skinny triples line at GlassBuild next week as well. So, this, along with better pricing, will further fuel the fire for a Krypton comeback.

Yes, I believe that Krypton is poised for a comeback!

Leave a Reply

Your email address will not be published. Required fields are marked *